OEM Custom Aluminium Alloy Tasgadh Bathar Tilgeadh bhoCompanaidh Tilgeadh Sìona.
Mar as trice bidh aloidhean tilgeadh tasgaidh alùmanum air an cleachdadh airson tagraidhean gnìomhachais. Tha iad a’ nochdadh neart meadhanach, castability sàr-mhath, weldability agus teannachadh cuideam. Mar as trice air a chleachdadh airson cumaidhean nas iom-fhillte le mion-chomharrachadh nas teann agus meudan nas ìsle.Tilgeadh tasgaidh, ris an canar cuideachdtilgeadh mionaideachdno tilgeadh cèir caillte, air a chleachdadh gu farsaing leis gu bheil e a’ tabhann tilgeadh neo-chunbhalach le mion-fhiosrachadh fìor mhath airson a dhèanamh gu ìre mhath saor. Tha am pròiseas a’ toirt a-steach a bhith a’ dèanamh tilgeadh meatailt a’ cleachdadh molltair teasairginn air a dhèanamh à pàtran mac-samhail cèir. Is iad na ceumannan a tha an sàs sa phròiseas no an tilgeadh cèir caillte:
• Cruthaich pàtran cèir no mac-samhail
• Sprue am pàtran cèir
• Dèan tasgadh air a' phàtran cèir
• Cuir às don phàtran cèir le bhith ga losgadh (am broinn an fhùirneis no ann an uisge teth) gus molltair a chruthachadh.
• Feachd meatailt leaghte a-steach don mhullach
• Fuarachadh agus Solidification
• Thoir air falbh sprue bho na tilgeadh
• Cuir crìoch air agus snas air na tilgeadh tasgaidh crìochnaichte
| Stuthan airson Pròiseas Tilgeadh Tasgaidh aig RMC | |||
| Roinn-seòrsa | Ìre Sìona | Ìre na SA | Ìre na Gearmailt |
| Ferritic stàilinn | 1Cr17, 022Cr12, 10Cr17, | 430, 431, 446, CA-15, CA6N, CA6NM | 1.4000, 1.4005, 1.4008, 1.4016, GX22CrNi17, GX4CrNi13-4 |
| Stàilinn Martensitic | 1Cr13, 2Cr13,3Cr13,4Cr13, | 410, 420, 430, 440B, 440C | 1.4021, 1.4027, 1.4028, 1.4057, 1.4059, 1.4104, 1.4112, 1.4116, 1.4120, 1.4122, 1.4125 |
| Stàilinn Austenitic stainless | 06Cr19Ni10, 022Cr19Ni10, 06Cr25Ni20, 022Cr17Ni12Mo2, 03Cr18Ni16Mo5 | 302, 303, 304, 304L, 316, 316L, 329, CF3, CF3M, CF8, CF8M, CN7M, CN3MN | 1.3960, 1.4301, 1.4305, 1.4306, 1.4308, 1.4313, 1.4321, 1.4401, 1.4403, 1.4404, 1.4405, 1.4404, 9. 1.4435, 1.4436, 1.4539, 1.4550, 1.4552, 1.4581, 1.4582, 1.4584, |
| Sileadh cruadhachadh stàilinn gun staoin | 05Cr15Ni5Cu4Nb, 05Cr17Ni4Cu4Nb | 630, 634, 17-4PH, 15-5PH, CB7Cu-1 | 1.4542 |
| Duplex stàilinn gun staoin | 022Cr22Ni5Mo3N, 022Cr25Ni6Mo2N | A 890 1C, A 890 1A, A 890 3A, A 890 4A, A 890 5A, A 995 1B, A 995 4A, A 995 5A, 2205, 2507 | 1.4460, 1.4462, 1.4468, 1.4469, 1.4517, 1.4770 |
| Stàilinn Àrd Mn | ZGMn13-1, ZGMn13-3, ZGMn13-5 | B2, B3, B4 | 1.3802, 1.3966, 1.3301, 1.3302 |
| Stàilinn inneal | Chr12 | A5, H12, S5 | 1.2344, 1.3343, 1.4528, GXCrMo17, X210Cr13, GX162CrMoV12 |
| Stàilinn a tha an aghaidh teas | 20Cr25Ni20, 16Cr23Ni13, 45Cr14Ni14W2Mo | 309, 310, CK20, CH20, HK30 | 1.4826, 1.4828, 1.4855, 1.4865 |
| Alloy Nickle-bonn | HASTELLY-C, HASTELLY-X, SUPPER22H, CW-2M, CW-6M, CW-12MW, CX-2MW, HX (66Ni-17Cr), MRE-2, NA-22H, NW-22, M30C, M-35 -1, INCOLOY600, INCOLOY625 | 2.4815, 2.4879, 2.4680 | |
| Aluminium Alloy | ZL101, ZL102, ZL104 | ASTM A356, ASTM A413, ASTM A360 | G-AlSi7Mg, G-Al12 |
| Alloy copair | H96, H85, H65, HPb63-3, HPb59-1, QSn6.5-0.1, QSn7-0.2 | C21000, C23000, C27000, C34500, C37710, C86500, C87600, C87400, C87800,C52100,C51100 | CuZn5, CuZn15, CuZn35, CuZn36Pb3, CuZn40Pb2, CuSn10P1, CuSn5ZnPb, CuSn5Zn5Pb5 |
| Alloy cobalt-base | UMC50, 670, Ìre 31 | 2. 4778 | |
| Sgilean innealachaidh mionaideachd CNC | ||||
| Goireasan | Meud | Raon meud | Comas Bliadhnail | Cruinneas Coitcheann |
| Ionad Machining Inghearach (VMC) | 48 seata | 1500mm × 1000mm × 800mm | 6000 tunna no 300000 pìosan | ±0.005 |
| Ionad Machining Cothromach (VMC) | 12 seata | 1200mm × 800mm × 600mm | 2000 tunna no 100000 pìosan | ±0.005 |
| Inneal CNC | 60 seata | Max tionndadh dia. mu 600mm | 5000 tunna no 600000 pìosan | |
